Solenoid Valve - Solid 3/4" Brass - 12V DC

Solenoid Valve - Solid 3/4" Brass - 12V DC

Model: SVB-3/4-12VDC

Description

This normally closed (N/C) electric solenoid valve is constructed with a durable brass body, 3/4" female threaded (NPT) connections, and strong VITON gasket.   Suitable for use with hot or cold water, natural gas, air, very low viscosity fluids (< 20 cst) and gasoline or other petroleum-based liquids. Customers chose this general-purpose valve for supplemental gas tanks, sprinkler systems, and more.

Specifications

Size: 3/4"

Flow Aperture: 20 mm

Body Material: Brass

Gasket / Diaphragm / Seal: VITON

Rated voltage: DC 12 V, ±10%

Current: 1A

Power rating: 12 W

Operation Type: Direct Lift Valve

Operation Mode: Normally Closed

Level of protection: IP65

Operational pressure range: 0 to 116 PSI / 0-0.8 MPa (for Air, Water); 0 to 72 PSI / 0-0.5 MPa (for Oil)

Minimum operational temperature: 14 degrees Fahrenheit (-10 degrees Celsius)

Maximum operational temperature: 248 degrees Fahrenheit (120 degrees Celsius)

Flow capacity: 7.6 gallons per minute (GPM) of water at 60oF with a pressure drop of 1 PSI

Flow value: 7.6 Cv

Suitable Media: Air, water, oil, natural gas, diesel fuel, kerosene etc. Cannot be used in strong acid, strong base, wastewater, industrial gas and other media containing many impurities.

 OVERHEATING WARNING: While energized, under normal operating conditions, solenoid valve will get HOT. The coil will reach a maximum temperature of about 80℃. It is fully complied with national standard: JB/T7352-2010. Energized continuously for no more than 24h at a time is recommended.

 CA PROP65 WARNING - This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. They are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.