Industrial Wireless Float Switch Transmitter / Contactor Receiver System

Industrial Wireless Float Switch Transmitter / Contactor Receiver System

Model: WID-900XL-FS

Features

• Wireless Bridge Between Float Switch & Control Contactor
• Transmitter is DC or AC powered and Activated with Included Float Switch
• Up To 6 Miles Line-of-site Transmit/Receive Distance (with optional Antennas)
• Receiver Available with 120V, 30 Amp 3-Pole or 240V, 60A 4-Pole Contactor for Pump Control
• Receiver is AC Powered and Features an "Auto - Off - Run" Control Switch
• Weatherproof Painted Metal Enclosures
• Pre-configured, Ready-To-Operate
• Sold As Transmitter/Receiver Matched Set
• 900 MHz License Free Radio Operation

Applications

• Pump or Motor Control
• Water Tank Level Control

Description

The WID-900XL-FS Wireless Remote-Control Float Switch Control System is for remotely activating a pump from a distance up to 6 miles away from your water tank using license free 900 MHz wireless communication. The wireless float switch transmitter input controls the Contactor in the receiver unit. 

Each system is sold as a factory programmed matched set. That means there is no field settings needed to operate right out of the box. 

Transmitter is 12-24V DC, or 120-240V AC Powered

Receiver is either 120V AC or 240V AC Powered (by model ordered)

General Specifications
Radio Frequency: 900 MHz
Regulatory: FCC Part 15 (No license required)
Control Lines: 1
Antenna Connection: RP-SMA, 10ft Cables Included
Antennas: 9dbi, Yagi (Included) Lightning Protection Modules (Included)
Transmit/Receive Distance:
with included antennas: Indoor/Urban 600ft, Line-of-site 3 Miles
with optional antennas: Indoor/Urban 1600ft, Line-of-site 6 Miles
Transmitter/Receiver Code Matching: Factory set
Wire Connection: Terminal Blocks
Operating Temperature: -22 to 113 ºF (-30 to 45 ºC)
Enclosures: NEMA 4X, Transmitter is PVC, Receiver is Painted Metal

Switch Transmitter Specifications
RF Power Output: 250mW
RF Output Impedance: 50 Ohm nominal
RF Data Rate: 250 kbps
Operating Power: 12-24V DC, or 120V-240V AC
Control Input Type: Dry-contact, Non-Powered Float Switch (Included)

Contactor Receiver Specifications
Receive Sensitivity: -110 dBm
Operating Power: 120V AC, or 240V AC @ 6W (by model ordered)
Control Output: 120V AC, 30 Amp, 3-Pole Contactor or 240V AC, 60A, 4-Pole Contactor (by model ordered)

Float Switch Included
Mechanical Arrangement: Level Action
Cord Length: 12'
Contact Action: SPDT - 1 NO 1 NC
Activation Angle: 45°
Maximum Operating Temperature: 50°C
Protection Grade: IP68
For Use With: Drinking water, septic tanks

Regulatory Approvals

FCC (USA) - MCQ-XB900HP
IC (Canada) - 1846A-XB900HP

Available Models: WID-900XL-FS-120VAC, WID-900XL-FS-240VAC

What's Included...

Wireless Float Switch Transmitter

Wireless Control Receiver with Power Contactor

Weatherproof Enclosures

Omni Directional Antennas with 16ft Antenna Cables

Antenna Lightning Surge Protectors

Float Switch with Integral Cable

Note: For distances greater than 3 miles, or applications that have obstacles such as trees, buildings or hills in the signal path, you need to also order the optional Yagi directional antennas.