Din-rail 2.4 GHz Wireless Remote Control Switch Transmitter with Multiple Control Receivers (Single Control Line)
DRWC-24-1-MP-2RDin-rail 2.4 GHz Wireless Remote Control Switch Transmitter with Multiple Control Receivers (Single Control Line)
Features
- Wireless Bridge Between One Switch & Multi-Control Relays
- Activate Transmitter with Any Dry-contact Switch
- Models Feature 1 Single Input Switch Transmitter with multiple Paired Receivers
- Up To 1 Mile Line-of-site Transmit/Receive Distance
- One-way Point-to-Multi-point Control
- Powered By 12-24V DC Supply
- Easy To Install Din-rail Style Enclosures
- Pre-configured, Ready-To-Operate
- Sold As One Transmitter Matched to Receiver Group
- License Free Radio Operation
Applications
- Valve Activation, Pump or Motor Control
- Gate or Lighting Control
- Multi-point Shutdown System
- Alarm Systems
Description
The DRWC-24-1-MP Series Wireless Remote-Control System allows for remotely activating equipment from a distance of up to 1 mile away using license free wireless communication. Each Transmitter unit is equipped with one single contact closure input that is used to control open-collector outputs on multiple receiver units. The transmitter can be activated with dry-contact switch or connected to a PLC for automated control and feedback.
General Specifications
Radio Frequency: 2.4 GHz
Regulatory: FCC (No license required)
Transmitter Control Lines: 1
Each Paired Receiver Control Line: 1
Antenna Connection: RP-SMA
Antennas: 5 dbi, Omni-directional (Included)
Transmit/Receive Distance (with included antennas)
Indoor/Urban 100ft, Line-of-site 600ft.
Transmit/Receive Distance (with optional antennas)
Indoor/Urban 1000ft, Line-of-site 1 Mile
Transceiver Code Matching: Factory set
Wire Connection: Terminal Blocks
Operating Temperature: -22 to 113 ºF (-30 to 45 ºC)
Enclosures: Din-rail mount (35mm), ABS/PC Blend Plastic
Transmitter Specifications
RF Power Output: 79mW
RF Output Impedance: 50 Ohm nominal
RF Data Rate: 250 Kbps
Operating Power: 12 - 24V DC @ 3W max
Input Type: Dry-contact
Receiver Specifications
Receive Sensitivity: -103 dBm
Operating Power: 12 - 24V DC @ 3W max
Control Output: Open-collector, 12-24V DC, 100mA Max
Regulatory Approvals
FCC(USA) - MCQ-XBEE3
IC (Canada) - 1846A-XBEE3
Available Models
| Model No. | Description |
| DRWC-24-1-MP-2R | One 1-Line Switch Transmitters with Two 1-Line Control Receivers |
| DRWC-24-1-MP-3R | One 1-Line Switch Transmitters with Three 1-Line Control Receivers |
| DRWC-24-1-MP-4R |
One 1-Line Switch Transmitters with Four 1-Line Control Receivers |
| DRWC-24-1-MP-6R |
One 1-Line Switch Transmitters with Six 1-Line Control Receivers |
| DRWC-24-1-MP-8R |
One 1-Line Switch Transmitters with Eight 1-Line Control Receivers |
| DRWC-24-1-MP-10R |
One 1-Line Switch Transmitters with Ten 1-Line Control Receivers |
| DRWC-24-1-MP-12R |
One 1-Line Switch Transmitters with Twelve 1-Line Control Receivers |
Control Line Mapping
Transmitter Switch Input #1 - Turns On #1 Output in All Paired Control Receivers
Additional Control Receivers can be added to this system. Please contact us to discuss your application.
Available Options
| Model No. | Description |
| DRWC-24-LRANT | Optional 2.4 GHz Long Distance Yagi Antenna - 1 Mile Operation |
| DRR-12VDC-5A | Din-rail Mounted Control Relay, DPDT, 12V DC Coil Voltage, 120/240V 10 Amp Load Max |
| ACWA-120-12V-1A | Power Supply, 120V AC to 12V DC Converter (1A) |
| ANT-EXT | Antenna Extension Cables |
Each Order Includes: Switch Transmitter, Control Receivers, Standard Antennas, 6 ft Antenna Extension Cables and User Manual.