Long Distance 2.4 GHz Wireless Remote Control Switch Transmitter / Repeater / Relay Receiver

Industrial Long Distance 2.4 GHz Wireless Remote Control Switch Transmitter / Repeater / Relay Receiver

Series: WPC24-XL-RP

Features

• Wireless Bridge Between Switch & Control Relay
• System Works With Any Dry-contact Switch
• Included Repeater Provides Up To 2 Miles Transmit/Receive Distance
• Weatherproof NEMA 4X Rated Enclosures
• Use To Control Pump, Valve, Motor or Lighting
• Optional Solar Power Kit for Transmitter or Repeater
• Receiver Unit Features DPDT 10A Control Relays
• License Free Point-to-point Radio Operation

Applications

• Pump or Motor Control
• Valve Activation
• Gate or Lighting Control

Note: This system includes a Repeater unit not shown in the pictures. The Repeater allows you to send signals around obstacles such as buildings, dense trees or hills.

Description

Series WPC24-XL-RP Wireless Switch/Control System with Repeater  provides a wireless bridge between any type dry-contact switch and a control relay. When a switch connected to the transmitting unit opens or closes signals are sent via a license free radio signal to a Repeater unit up to 1 mile away, the Repeater then sends a signal to a receiver unit up to 1 mile away. When the control box receives the proper wireless signal from the Repeater a control relay inside the panel is energized to operate a pump, valve or motor.

Each system is sold as a factory programmed matched set. That means there is no field settings needed to operate right out of the box. Power for the transmitter, repeater or receiver can come from any external 12-14V DC power supply or battery.

NOTE: UNITS ARE FACTORY PROGRAMMED AS A SINGLE MATCHED SET. IF YOU WANT TO USE ONE TRANSMITTER TO CONTROL MORE THAN ONE RECEIVER, OR MORE THAN ONE TRANSMITTER TO CONTROL A SINGLE RECEIVER, PLEASE CONTACT US PRIOR TO PURCHASING SO WE CAN CUSTOMIZE A GROUP OF UNITS FOR YOU SPECIFIC TO YOUR APPLICATION. THERE IS NO EXTRA CHARGE FOR THIS SERVICE.

General Specifications
Radio Frequency: 2.4 GHz
Regulatory: FCC Part 15 (No license required)
Control Lines: 1, 2 ,3  or 4
Antenna Connection: RP-SMA
Antennas: 5dbi, Omni-directional (Included)
Transmit/Receive Distance from Transmitter to Repeater:
with Included Yagi antennas:, Line-of-site 1 Mile

Transmit/Receive Distance from Repeater to Receiver:
with Included Yagi antennas:, Line-of-site 1 Mile
Transmitter/Receiver Code Matching: Factory set
Wire Connection: Terminal Blocks
Operating Temperature: -22 to 113 ºF (-30 to 45 ºC)
Enclosures: NEMA 4X, PCT Plastic

Switch Transmitter Specifications
RF Power Output: 79mW
RF Output Impedance: 50 Ohm nominal
RF Data Rate: 250 kbps
Operating Power 12-14V DC @ 3W max
Control Input Type: Dry-contact Switch

Repeater Specifications
RF Power Output: 79mW
RF Output Impedance: 50 Ohm nominal
RF Data Rate: 250 kbps
Receive Sensitivity: -103 dBm
Operating Power 12-14V DC @ 3W max
Control Input Type: Dry-contact Switch

Relay Receiver Specifications

Receive Sensitivity: -103 dBm
Operating Power: 12-14V DC @ 3W max
Control Output: 10 Amp, 120/240V DPDT Relays

Regulatory Approvals
FCC(USA) - MCQ-XBEE3
IC (Canada) - 1846A-XBEE3

Available Models

Included Long Distance Antenna System Includes 2 Yagi Transmitter/Repeater antennas and 2 Standard Omni antennas for Repeater and Relay Receiver.