1-Zone Industrial Temperature Control Panel - Thermocouple Type-K, J, T, or E Input - 120V AC, 22A Capacity
TCPSS-1Z-22A-K1-Zone Industrial Temperature Control Panel with Type-K, J, T, or E Thermocouple Input - 120V AC, 22A Capacity
Features
- Digital Temperature Controller Accurate To ± 0.3% FS
- Front Panel Alarm Buzzer/Red Indicator
- Rugged, NEMA 1 Painted Steel Enclosure
- Pre-assembled, Pre-wired, Ready-To-Operate
- Configured For Type-K, J, T or E Thermocouples
- 120VAC, SSR with 22A (2640 Watts) Control Capacity
Applications
- R & D Laboratory Use
- Equipment Sterilization
- Food & Pharmaceutical Processing
Description
Series TCPSS-1Z-22A are Economical, Wall Mount, 1-Zone Thermocouple Temperature Control Panels that provide accurate temperature control for a variety of laboratory and industrial heating applications. The units operates on 120V AC and consists of a high performance, dual display auto-tuning PID temperature controller with one pre-wired Solid State Relay (SSR} control output. Front panel features an On/Off switch and an alarm module that provides both visual and audible warnings. Models are available for J, K, E Thermocouple or PT100 RTD sensor types. The fused output provides up to 22 Amps capacity to control heaters and other similar resistive scientific and industrial heating equipment.
Specifications
Sensor Input: Thermocouple K, J, T or E-Type (By Model)Temperature Range: See Table
Sensor Connection: Panel Jack (Mating Connector Included)
Panel Control Output: Internal Solid Sate Relay (SSR)
Control Capacity: 120V AC, 22A (2640 Watts) Max
Temperature Controller Type: Auto-tune PID
Temperature Accuracy: ± 0.3% of Full Scale
Display Type: Dual 4-digit LED
Display Range: -1999 to 9999 (Depends on input type)
Operating Voltage: 120V AC, 50/60 Hz
Controller/Alarm Fusing: 1A (10 x 38mm)
Control Output Fusing: 32A (10 x 38mm)
Alarm: Audible Buzzer with Red Indicator
Operating Temperature: 32 to 124 ºF (0 to 51 ºC)
Enclosure Type: NEMA 1, Painted Steel with Knockouts
Enclosure Dimensions: 12 x 8 x 6” (305 x 203 x 153mm)
This model is not available with pr-wired input and output cables. You must hard-wire the unit.
Note: Sensor input type is factory set and dedicated by model.
Temperature Control Range
Input Type | Temperature Control Range |
Type-K | 32 to 2192 ºF (0 to 1200 ºC) |
Type-J | 32 to 1832 ºF (0 to 1000 ºC) |
Type-T | -238 to 752 ºF (-150 to 400 ºC) |
Type-E | 32 to 1832 ºF (0 to 1000 ºC) |