2.4 GHz Wireless Remote Control Switch Station with Relay Receiver - 400ft Max DistanceSD-WSSP-PC24-1PB
2.4 GHz Wireless Remote Control Switch Station with Relay Receiver - 400ft Max Distance
- Wireless Bridge Between Pre-wired Switches & Relays
- Available with Push-button or Rotary Switches
- Models Available With 1 or 2 Control Lines
- Up To 1 400ft Line-of-site Transmit/Receive Distance
- Receiver has 10 Amp SPDT Control Relay
- Powered by 120V AC, or 12V-14V DC Supply
- PVC Conduit Enclosures
- Pre-configured, Ready-To-Operate
- Sold As Transmitter/Receiver Matched Set
- License Free Radio Operation
- Pump or Motor Control
- Valve Activation, Gate or Lighting Control
The SD-WSSP-PC24 Series Wireless Remote Control Switch Stations with Relay Receivers are for remotely activating equipment from a distance up to 1 mile away using license free wireless communication. The switch Transmitter is equipped with up to 2 pre-wired switch inputs that are used to control SPDT Relays in the receiver units. Models are available with 1 or 2 control lines.
Each system is sold as a factory programmed matched set. That means there is no field settings needed to operate right out of the box. Power for the transmitter or receiver can come from any external 120V AC, or 12-14V DC power supply.
NOTE: UNITS ARE FACTORY PROGRAMMED AS A SINGLE MATCHED SET. IF YOU WANT TO USE ONE TRANSMITTER TO CONTROL MORE THAN ONE RECEIVER, OR MORE THAN ONE TRANSMITTER TO CONTROL A SINGLE RECEIVER, PLEASE CONTACT US PRIOR TO PURCHASING SO WE CAN CUSTOMIZE A GROUP OF UNITS FOR YOU SPECIFIC TO YOUR APPLICATION. THERE IS NO EXTRA CHARGE FOR THIS SERVICE.
Radio Frequency: 2.480 GHz
Regulatory: FCC Part 15 (No license required)
Control Lines: 1 or 2
Antenna Connection: RP-SMA
Antennas: 5dbi, Omni-directional (Included)
with included antennas: Line-of-site (LOS) up to 200ft.
with optional antennas: Line-of-site (LOS) up to 400ft.
Transmitter/Receiver Code Matching: Factory set
Wire Connection: 4’ Cable with stripped leads
Operating Temperature: -22 to 140 ºF (-30 to 60 ºC)
Enclosures: PVC, Conduit Body, 1/2" Mount (Condelette)
Switch Transmitter Specifications
RF Power Output: 0 dBm (1mW)
RF Output Impedance: 50 Ohm nominal
RF Data Rate: 250 kbps
Operating Power 12-24V DC @ 3W max
Control Input Type: Dry-contact Switch
Receive Sensitivity: -94 dBm
Operating Power: 12-24V DC @ 3W max
Control Output: 10 Amp, 120/240V SPDT Relays
|SD-WSSP-PC24-1PB||1 On/Off Push-Button Switch Transmitter with Control Receiver.|
|SD-WSSP-PC24-2PB||2 On/Off Push-Button Switch Transmitter with Control Receiver.|
|SD-WSSP-PC24-1RS||1 On/Off Rotary Switch Transmitter with Control Receiver.|
|SD-WSSP-PC24-2RS||2 On/Off Rotary Switch Transmitter with Control Receiver.|
|XTSD-24-MDANT-9||Optional 2.4 GHz Medium Distance Antenna (up to 400ft line-of-site)|
|ACWA-120-12V-1A||Power Supply, 120V AC to 12V DC Converter (1A)|
|ANT-EXT||Antenna Extension Cables|
Each Transmitter/Receiver Set includes standard antennas and manual.