1-Zone Benchtop Temperature Controller - Thermocouple Input - 8A, SSR Control Output

  • $445.00
    Unit price per 
Shipping calculated at checkout.

1-Zone Benchtop Temperature Controller - 8A, SSR Control Output


  • Built-in SSR with 8 Amp Load Capacity
  • Accurate Up To ± 0.5% of Full Scale Input
  • Rugged, Vented, Steel Benchtop Case Design
  • Preassembled, Prewired, Ready-To-Use
  • Self-powered Fused Control Output
  • Available In J, K or T Thermocouple Calibration


  • Laboratory Heating Blankets & Tapes
  • R & D Laboratory Use
  • Equipment Sterilization
  • Food & Pharmaceutical Processing

Series MBC1A are compact Benchtop Temperature Controllers that provide accurate temperature control for a variety of laboratory heating applications. The metal enclosure is compact at only 2.6" high x 5.5" wide x 5.7" deep. The unit operates on 120VAC and consists of a high-performance temperature controller with one prewired output. The fused 120V AC output provides up to 8 Amps to control heaters and other similar scientific and industrial equipment. Temperature is controlled by connecting any standard thermocouple. A switch on the front panel controls both power to the unit and output power. Standard features include a fused power cord and fused output receptacle. Thermocouple sensor is connected via an industry standard miniature jack located on the rear panel (Mating Connected Included).

Temperature Accuracy: ± 0.5% Full scale
Display: 4-digit LED
Display Resolution: ± 1º
Control Mode: PID Autotune
Operating Voltage: 120V AC, 50/60 Hz (Integral 6 ft Power Cord)
Alarm Relay: 3A
Operating Temperature: 32 to 130 ºF (0 to 50 ºC)
Enclosure: Painted Steel Body, Aluminum Panels
Dimensions: 2.6” H x 5.6” W x 6.7” L

Available Models

 Model Number  Control Output  Temperature Range
MBC1A-TC-J 120V AC / 8A (SSR)   32 to 1499 ºF (0 to 815 ºC)
MBC1A-TC-K 120V AC / 8A (SSR)   32 to 2192 ºF (0 to 1200 ºC)
MBC1A-TC-T 120V AC / 8A (SSR)   -238 to 752 ºF (-150 to 400 ºC)


Each Benchtop Controller includes a Mating Input Connector and User Guide.