Industrial 2.4GHz Wireless Remote Control 120V AC I/O Input Transmitter / Relay Receiver

Industrial 2.4 GHz Wireless Remote Control Switch Transmitter / Relay Receiver

Series: WPC24-120V-XL

Features

• Wireless Bridge Between 120V I/O Switch & Control Relay
• System Works with 120V Switched Input
• Up To 1 Mile (LOS) Transmit/Receive Distance
• Weatherproof NEMA 4X Rated Enclosures
• Use To Control Pump, Valve, Motor or Lighting
• Optional Solar Power Kit for Transmitter
• Receiver Unit Features DPDT 10A Control Relays
• License Free Point-to-point Radio Operation

Applications

• Pump or Motor Control
• Valve Activation
• Gate or Lighting Control

Description

Series WPC24-120V-XL Wireless Switch/Control System provides a wireless bridge between any 120V switch and a control relay. When 120V is connected to the transmitting unit open or close signals are sent via a license free radio signal to a receiver unit up to 1 mile (Line-of-site) away. When the control box receives the proper wireless signal from the transmitter a control relay inside the panel is energized to operate a pump, valve or motor.

Each system is sold as a factory programmed matched set. That means there is no field settings needed to operate right out of the box. Power for the transmitter or receiver is 120V AC

NOTE: UNITS ARE FACTORY PROGRAMMED AS A SINGLE MATCHED SET. IF YOU WANT TO USE ONE TRANSMITTER TO CONTROL MORE THAN ONE RECEIVER, OR MORE THAN ONE TRANSMITTER TO CONTROL A SINGLE RECEIVER, PLEASE CONTACT US PRIOR TO PURCHASING SO WE CAN CUSTOMIZE A GROUP OF UNITS FOR YOU SPECIFIC TO YOUR APPLICATION. THERE IS NO EXTRA CHARGE FOR THIS SERVICE.

General Specifications
Radio Frequency: 2.4 GHz
Regulatory: FCC Part 15 (No license required)
Control Lines: 1, 2 ,3 or 4
Antenna Connection: RP-SMA
Antennas: 5 dbi, Omni-directional (Included)
Transmit/Receive Distance:
with included antennas: Indoor/Urban 300ft, Line-of-site 600ft
with optional Yagi antennas: Indoor/Urban 1000ft, Line-of-site 1 Mile
Transmitter/Receiver Code Matching: Factory set
Wire Connection: Terminal Blocks
Operating Temperature: -22 to 113 ºF (-30 to 45 ºC)
Enclosures: NEMA 4X, PCT Plastic

Switch Transmitter Specifications
RF Power Output: 79mW
RF Output Impedance: 50 Ohm nominal
RF Data Rate: 10 kbps
Operating Power 120V AC @ 3W max
Control Input Type: 120V AC I/O

Relay Receiver Specifications
Receive Sensitivity: -103 dBm
Operating Power: 120V AC @ 3W max
Control Output: 10 Amp, 120/240V DPDT Relays

Regulatory Approvals
FCC(USA) - MCQ-XBEE3
IC (Canada) - 1846A-XBEE3

Available Models

Long Distance Antenna Options

Each Transmitter/Receiver Set includes standard antennas, 6ft. antenna extension cables and manual.