Industrial 900 MHz Wireless Remote Control Switch Transmitter / Control Receiver
WCS900-OC-1Industrial 900 MHz Wireless Remote Control Switch Transmitter / Control Receiver
Series: WCS900-OC
Features
- Provides Wireless Bridge Between Switch & Relay
- Activate Transmitter with Any Dry-contact Switch
- Models Available With 1, 2 or 4 Control Lines
- Up To 6 Miles Line-of-site Transmit/Receive Distance
- Receiver Provides Open-collector Control Output
- Transmitter Powered By AC or DC Supply
- Easy To Install NEMA 4X Enclosures
- Pre-configured, Ready-To-Operate
- Sold As Transmitter/Receiver Matched Set
- License Free Radio Operation
Applications
- Pump or Motor Control
- Valve Activation
- Gate or Lighting Control
Description
The WCS900-OC Series Wireless Remote Control System allows for remotely activating equipment from a distance of up to 6 miles away using license free wireless communication. The transmitter is equipped with up to four contact closure inputs that are used to control open-collector outputs on the receiver unit. Models are available with 1, 2 or 4 control lines. Transmitter can be activated with dry-contact switches or connected to a PLC for automated control.
Each system is sold as a factory programmed matched set. That means there is no field settings needed to operate right out of the box. Power for the transmitter or receiver can come from any external 12-24V DC power supply or battery.
NOTE: UNITS ARE FACTORY PROGRAMMED AS A SINGLE MATCHED SET. IF YOU WANT TO USE ONE TRANSMITTER TO CONTROL MORE THAN ONE RECEIVER, OR MORE THAN ONE TRANSMITTER TO CONTROL A SINGLE RECEIVER, PLEASE CONTACT US PRIOR TO PURCHASING SO WE CAN CUSTOMIZE A GROUP OF UNITS FOR YOU SPECIFIC TO YOUR APPLICATION. THERE IS NO EXTRA CHARGE FOR THIS SERVICE.
General Specifications
Radio Frequency: 900 MHz
Regulatory: FCC Part 15 (No license required)
Control Lines: 1, 2 ,3 or 4
Antenna Connection: RP-SMA
Antennas: 7dbi, Omni-directional (Included)
Transmit/Receive Distance:
with included antennas: Indoor/Urban 1000ft, Line-of-site 3 Miles
with optional Yagi antennas: Indoor/Urban 1600ft, Line-of-site 6 Miles
Transmitter/Receiver Code Matching: Factory set
Wire Connection: Terminal Blocks
Operating Temperature: -22 to 113 ºF (-30 to 45 ºC)
Enclosures: NEMA 4X, PCT Plastic
Switch Transmitter Specifications
RF Power Output: 250mW
RF Output Impedance: 50 Ohm nominal
RF Data Rate: 10 kbps
Operating Power 12-24V DC @ 3W max
Control Input Type: Dry-contact Switch
Relay Receiver Specifications
Receive Sensitivity: -110 dBm
Operating Power: 12-24V DC @ 3W max
Control Output: Open-collector, 24V DC, 100mA Max Load
Regulatory Approvals
FCC(USA) - MCQ-XB900HP
IC (Canada) - 1846A-XB900HP
Available Models
| Model No. | Description | Control Lines |
| WCS900-OC-1 | Industrial 900 MHz Wireless 1-Line Remote Control Transmitter/Receiver Set | 1 |
| WCS900-OC-2 | Industrial 900 MHz Wireless 2-Line Remote Control Transmitter/Receiver Set | 2 |
| WCS900-OC-3 | Industrial 900 MHz Wireless 3-Line Remote Control Transmitter/Receiver Set | 3 |
| WCS900-OC-4 | Industrial 900 MHz Wireless 4-Line Remote Control Transmitter/Receiver Set | 4 |
Long Distance Antenna Options
| Model No. | Description |
| DRWC-900-LRANT | Optional 900 MHz Long-Range Directional Antenna (up to 1 Mile line-of-site) |
Each Transmitter/Receiver Set includes standard antennas, 6ft. antenna extension cables and manual.