Industrial Long Distance 2.4 GHz Wireless Remote Control Switch Transmitter / Relay Receiver
WPC24-XL-SW1-RC1Industrial Long Distance 2.4 GHz Wireless Remote Control Switch Transmitter / Relay Receiver
Series: WPC24-XL
Features
- Wireless Bridge Between Switch & Control Relay
- System Works With Any Dry-contact Switch
- Up To 1 Mile (LOS) Transmit/Receive Distance
- Weatherproof NEMA 4X Rated Enclosures
- Use To Control Pump, Valve, Motor or Lighting
- Optional Solar Power Kit for Transmitter
- Receiver Unit Features DPDT 10A Control Relays
- License Free Point-to-point Radio Operation
- Optional Latching Circuit with Battery Backup
Applications
- Pump or Motor Control
- Valve Activation
- Gate or Lighting Control
Description
Series WPC24-XL Wireless Switch/Control System provides a wireless bridge between any type dry-contact switch and a control relay. When a switch connected to the transmitting unit opens or closes signals are sent via a license free radio signal to a receiver unit up to 1 mile (Line-of-site) away. When the control box receives the proper wireless signal from the transmitter a control relay inside the panel is energized to operate a pump, valve or motor.
Each system is sold as a factory programmed matched set. That means there is no field settings needed to operate right out of the box. Power for the transmitter or receiver can come from any external 12-14V DC power supply or battery.
NOTE: UNITS ARE FACTORY PROGRAMMED AS A SINGLE MATCHED SET. IF YOU WANT TO USE ONE TRANSMITTER TO CONTROL MORE THAN ONE RECEIVER, OR MORE THAN ONE TRANSMITTER TO CONTROL A SINGLE RECEIVER, PLEASE CONTACT US PRIOR TO PURCHASING SO WE CAN CUSTOMIZE A GROUP OF UNITS FOR YOU SPECIFIC TO YOUR APPLICATION. THERE IS NO EXTRA CHARGE FOR THIS SERVICE.
General Specifications
Radio Frequency: 2.4 GHz
Regulatory: FCC Part 15 (No license required)
Control Lines: 1, 2 ,3 or 4
Antenna Connection: RP-SMA
Antennas: 5dbi, Omni-directional (Included)
Transmit/Receive Distance:
with included antennas: Indoor/Urban 100ft, Line-of-site 600ft.
with optional Yagi antennas: Indoor/Urban 1000ft, Line-of-site 1 Mile
Transmitter/Receiver Code Matching: Factory set
Wire Connection: Terminal Blocks
Operating Temperature: -22 to 113 ºF (-30 to 45 ºC)
Enclosures: NEMA 4X, PCT Plastic
Switch Transmitter Specifications
RF Power Output: 79mW
RF Output Impedance: 50 Ohm nominal
RF Data Rate: 250 kbps
Operating Power 12-14V DC @ 3W max
Control Input Type: Dry-contact Switch
Relay Receiver Specifications
Receive Sensitivity: -103 dBm
Operating Power: 12-14V DC @ 3W max
Control Output: 10 Amp, 120/240V DPDT Relays
Regulatory Approvals
FCC(USA) - MCQ-XBEE3
IC (Canada) - 1846A-XBEE3
Available Models
| Model No. | Description | Control Lines |
| WPC24-XL-SW1-RC1 | Industrial 2.4 GHz Wireless 1-Line Remote Control Transmitter/Receiver Set | 1 |
| WPC24-XL-SW2-RC2 | Industrial 2.4 GHz Wireless 2-Line Remote Control Transmitter/Receiver Set | 2 |
| WPC24-XL-SW3-RC3 | Industrial 2.4 GHz Wireless 3-Line Remote Control Transmitter/Receiver Set | 3 |
| WPC24-XL-SW4-RC4 | Industrial 2.4 GHz Wireless 4-Line Remote Control Transmitter/Receiver Set | 4 |
| WPC24-XL-SW1-RC1-TLSBB | Industrial 2.4 GHz Wireless 1-Line Remote Control Transmitter/Receiver Set with Transmitter Latch Circuit & Battery Backup | 1 |
Long Distance Antenna Options
| Model No. | Description |
| DRWC-24-LRANT | Optional 2.4 GHz Long-Range Directional Antenna (up to 1 Mile line-of-site) |
Each Transmitter/Receiver Set includes standard antennas, 6ft. antenna extension cables and manual.