Long Distance 2.4 GHz Wireless Remote Control Switch Transmitter / Relay Receiver with Key fob Transmitters - 1 Mile

Long Distance 2.4 GHz Wireless Remote Control Switch Transmitter / Relay Receiver with Key fob Transmitters

Series: WPC24-XL-KF

Features

• Wireless Bridge Between Key Fob Switch & Control Relay
• Up To 1 Mile (LOS) Transmit/Receive Distance
• Weatherproof NEMA 4X Rated Enclosures
• Use To Control Pump, Valve, Motor, Gate or Lighting
• Receiver Unit Features DPDT 10A Control Relays
• License Free Point-to-point Radio Operation

Applications

• Pump or Motor Control
• Valve Activation
• Gate or Lighting Control

Description

Series WPC24-XL-KF Wireless Key Fob Switch/Control System provides a wireless bridge between a key fob switch and a control relay. When the included key fob switch is activated signals are sent via a license free radio signal to a transceiver unit mounted within 300 ft or less from the key fobs, the transceiver unit then send the same command to a long distance receiver unit up to 1 mile (Line-of-site) away. When the relay control box receives the proper wireless signal from the key fob transmitter/transceiver unit a control relay inside the receiver is energized to operate a pump, valve, gate or motor.

Each system is sold as a factory programmed matched set. That means there is no field settings needed to operate right out of the box. Power for the transmitter interface box or receiver can come from any external 12-14V DC power supply or battery.

NOTE: UNITS ARE FACTORY PROGRAMMED AS A SINGLE MATCHED SET. IF YOU WANT TO USE ONE TRANSMITTER TO CONTROL MORE THAN ONE RECEIVER, OR MORE THAN ONE TRANSMITTER TO CONTROL A SINGLE RECEIVER, PLEASE CONTACT US PRIOR TO PURCHASING SO WE CAN CUSTOMIZE A GROUP OF UNITS FOR YOU SPECIFIC TO YOUR APPLICATION. THERE IS NO EXTRA CHARGE FOR THIS SERVICE.

Note: Key fob switch transmitter must be within 300 feet of the Transmitter interface box when activated for proper operation.

Max distance between Transmitter interface box and the relay Receiver box is 1 Mile. (with optional Yagi antennas) See diagram for example installation.

Key Fob Switch Transmitter Specification

Radio Frequency: 433 Mhz
Control Buttons: 2 or 4
Max Transmit Distance: 300ft

Transmitter Interface Box Specifications

Radio Frequency: 2.4 GHz
RF Power Output: 79mW
Regulatory: FCC Part 15 (No license required)
Control Lines: 2 or 4
RF Output Impedance: 50 Ohm nominal
RF Data Rate: 250 kbps
Antenna Connection: RP-SMA
Antennas: 5dbi, Omni-directional (Included)
Transmit/Receive Distance:
with included antennas: Indoor/Urban 100ft, Line-of-site 600ft.
with optional Yagi antennas: Indoor/Urban 1000ft, Line-of-site 1 Mile
Transmitter/Receiver Code Matching: Factory set
Wire Connection: Terminal Blocks
Operating Temperature: -22 to 113 ºF (-30 to 45 ºC)
Enclosure: NEMA 4X, PCT Plastic
Operating Power 12-14V DC @ 3W max

Relay Receiver Specifications

Receive Sensitivity: -103 dBm
Operating Power: 12-14V DC @ 3W max
Control Output: 10 Amp, 120/240V DPDT Relays

Regulatory Approvals
FCC(USA) - MCQ-XBEE3
IC (Canada) - 1846A-XBEE3

Available Models

Long Distance Antenna Options

Each Transmitter/Receiver Set includes standard antennas, 6ft. antenna extension cables and manual.