Off-grid Solar Power System for Industrial Controls & Instrumentation

Off-grid Solar Power System for Industrial Controls & Instrumentation

Series - SPS-PCP

Features

• Regulated Power for Controls & Instrumentation
• 3 or 5-day Battery Reserve Power
• Provides Both 12 and 24V DC Output
• NEMA 3R Powder Coated Metal Enclosure
• Pre-assembled, Pre-wired, Ready-To-Install
• Deep-cycle SLA Maintenance Free Solar Battery

Each System Includes:

• Solar Panel
• Solar Panel Bracket
• NEMA 3R Metal Solar Battery Enclosure
• Solar Charge Controller with LVD
• Fused Solar Charging System
• Deep-cycle Solar Battery
• Solar Cable & Hardware
• Buck/Boost Converter with 24V DC output

Applications

• Wireless Sensors, Transmitters, Base Stations, Modems
• Wireless Switch Transmitters & Relay Receivers
• Process Controls, Instrumentation
• Oil & Gas Instrumentation
• Irrigation Drip System, Water Pumping, Valves
• Pond Aeration System
• Flow Meters, pH Transmitters Level Sensors, Data Loggers
• SCADA & Radio Telemetry Systems

Description

Each system comes pre-wired and includes a solar panel, NEMA 3R powder coated metal enclosure with a gasketed hinged door and closure buckles, solar panel bracket, solar charge controller, 24V dc-dc converter, fusing, solar power cables, lightning/surge protection module and SLA solar battery. Each model includes all the required system components to get you up and running right out of the box. Just mount and connect the included solar panel, Install and connect your equipment, flip the internal circuit breaker and you done.

Specifications

Operating Temperature: -40 to 140 ºF (-40 to 60 ºC)
Wire Connections: Din-rail Terminal Blocks (14 – 24 AWG)
Solar Panel Bracket: Aluminum, Pole Mount
Output Power for Equipment: 12/24V DC
Output Capacity (Watts/day): See model tables
Lightning/Surge Module: 500V (Silicon Oxide Varistor)
Solar Power Cables: 14 AWG, 9’ long, MC4 Connectors
Enclosure: NEMA 3R, Powder Coated GA
Enclosure Dimension: 12 x 12 x 10” (305 x 305 x 254mm)
Battery Reserve: See model tables

Note: Mounting pole note included. Requires 2" or 2 1/2” standard
metal conduit pole for mounting.

Available Models