Temperature Control Panel - Single Phase - 120V AC, 24A Load Capacity

  • $1,195.00
    Unit price per 
Shipping calculated at checkout.

Temperature Control Panel - Single Phase - 120V AC, 24A Load Capacity


  • Temperature Controller Accurate to ±0.25% span, ±1 lsd
  • Configured for One Phase, One Zone
  • Front Panel Alarm Buzzer/Red Indicator
  • Wall-mounted, NEMA Polycarbonate Enclosure
  • Pre-assembled, Pre-wired, Ready-To-Operate
  • Factory Configured for Thermocouple or PT100 (RTD a=0.00385) Input
  • 120V AC, SCR with 24A Control Capacity
  • Built-in Disconnecting Safety Contactor
  • RS-485 Modbus® A-5-11/RTU communication protocol


  • R & D Laboratory Use
  • Equipment Sterilization
  • Food & Pharmaceutical Processing


Series TCPXL-1Z-1P-120V are Industrial grade, Wall Mount, 1-Zone Temperature Control Panels that provide accurate temperature control for a variety of laboratory and industrial heating applications. The units operates on 120V AC and consists of a high performance, dual display auto-tuning PID temperature controller with one pre-wired Solid State Relay (SCR} control output. Front panel features an On/Off switch and an alarm module that provides both visual and audible warnings. Models are available for J, K, E Thermocouple or PT100 RTD sensor types. The fused output provides up to 24 Amps capacity to control heaters and other similar resistive scientific and industrial heating equipment.


Sensor Input: K, J, T, E-Type TC or PT100 (RTD a=0.00385) (By Model)
Temperature Control Range: See Table
Sensor Connection: Panel Jack or Terminal Block (by Model)
Panel Control Output: Internal Solid Sate Relay (SCR)
Control Capacity: 120V AC, 24A Max
Temperature Controller Type: Auto-tune PID
Temperature Accuracy: ± 0.3% of Full Scale
Display Type: Dual 4-digit LED
Display Range: -1999 to 9999 (Depends on input type)
Operating Voltage: 120V AC, 50/60 Hz
Controller/Alarm Fusing: 1A (10 x 38mm)
Control Output Fusing: 20A (10 x 38mm)
Alarm: Audible Buzzer with Red Indicator
Operating Temperature: 32 to 122 ºF (0 to 49 ºC)
Enclosure Type: NEMA 1, Polycarbonate
Power/Output Connection: Hard-wired Terminal Blocks
Enclosure Dimensions: 12 x 8 x 6” (305 x 203 x 153mm)


Note: Sensor input type is factory set and dedicated by model.

Temperature Control Range

Base Model Number  Input Type  Temperature Control Range
TCPXL-1Z-1P-120V-24A-K Type-K 32 to 2372 ºF (0 to 1300 ºC)
TCPXL-1Z-1P-120V-24A-J Type-J 32 to 2192 ºF (0 to 1000 ºC)
TCPXL-1Z-1P-120V-24A-T Type-T -328 to 752 ºF (-200 to 400 ºC)
TCPXL-1Z-1P-120V-24A-E Type-E 32 to 1112 ºF (0 to 600 ºC)
TCPXL-1Z-1P-120V-24A-PT100 PT100 (RTD a=0.00385) 32 to 1472 ºF (0 to 800 ºC)