Wireless Potentiometer Transmitter / Receiver Din-rail Set - 2.4 GHz

Wireless Potentiometer Transmitter / Receiver Din-rail Set - 2.4 GHz

  • $359.00
    Unit price per 
Shipping calculated at checkout.

Wireless Potentiometer Transmitter / Receiver Din-rail Set - 2.4 GHz

Model (SKU): WDRXL-24-POT

Note: The standard antennas included with this model allow for a maximum line-of-site (LOS) distance of 600 ft. For greater distances up to 1 mile you will need the long distance antenna option. Order optional antenna model DRWC-24-LRANT.


  • Provides Wireless Bridge for Potentiometer Signal
  • Input Values from 100 ohms to 100,000 ohms
  • Receiver Provides 4-20mA or 1-5V DC Output
  • Up To 1 Mile Line-of-site Transmit/Receive Distance
  • 12-24V DC Operation
  • Standard Plastic Din-rail Enclosures
  • Pre-configured, Ready-To-Operate
  • Sold As Transmitter/Receiver Matched Set
  • License Free Radio Operation


  • Process Transmitter Signals
  • Valve Positioning & Control
  • Remote Sensor Monitoring


The WDRXL-24-POT Wireless Potentiometer Transmitter/Receiver System allows for remotely monitoring Potentiometer Values from 100 ohms to 100,000 ohms from a distance up to 1 mile away using license free wireless 2.4GHz 802.15.4 communication. Each set features one Potentiometer signal input Transmitter and one analog current output receiver. Any value potentiometer from 100 ohms to 100,000 ohms can be used.

General Specifications
Radio Frequency: ISM 2.4Ghz
Process Input Lines: One 4-20mA
Signal Transmit/Receive Accuracy: +/- 0.5% of range
Open Input or Lost Signal Condition: Output Holds Last Reading
Reading Update Rate: 250ms
Antenna Connection: RP-SMA
Antennas: 5dbi, Omni-directional (Included)
Transmit/Receive Distance:
with included antennas: Indoor/Urban 100’, Line-of-site 600’.
with optional antennas: Indoor/Urban 300’, Line-of-site 1 Mile.
Transmitter/Receiver Code Matching: Factory set
Wire Connection: Terminal Blocks
Operating Temperature: -22 to 113 ºF (-30 to 45 ºC)
Enclosures: Plastic Din-rail

Transmitter Specifications
RF Power Output: 79mW
RF Output Impedance: 50 Ohm nominal
RF Data Rate: 10 kbps
Operating Power 12 - 24V DC @ 3W max
Signal Input: Potentiometer Resistance, any value from 100 ohms to 100,000 ohms.
Excitation Voltage: 3.3V DC, 20 mA max load
Accuracy: ±0.1% of span
Linearity: ±0.01% of span

 Receiver Specifications

Receive Sensitivity: -103 dBm
Operating Power: 12 - 24V DC @ 3W max
Process Output: Analog 4-20mA or 1-5V DC

Regulatory: FCC Part 15 (No license required)

IC (Canada) - 1846A-XBEE3