Wireless Remote-Control Set - 300ft Max Distance - Mounts on Industrial Enclosures

Wireless Remote-Control Set - 300ft Max Distance - Mounts on Industrial Enclosures

Series: XTSD-WRC-EM (Price includes both transmitter and receiver set)

Note: This models Receiver has Open-collector outputs. It does not have relays in the receiver. It requires you add your own external relay. For models that come with built-in relays in the receiver see model... XTSD-WRC-EM-R or XT-WRC-EM-R.

Features

• Provides Wireless Bridge Between Switches & Relays
• Activate Transmitter with Any Dry-contact Switch
• Mounts Directly to Standard Control Enclosures
• Models Available With 1 or 2 Control Lines
• Up To 300ft Line-of-site Transmit/Receive Distance
• Receiver Provides Open-collector Output
• Powered by any 12-24V DC Supply
• Mounts Externally on Industrial Enclosures
• Pre-configured, Ready-To-Operate
• Sold As Transmitter/Receiver Matched Set
• License Free Radio Operation

Applications

• Pump or Motor Control Panels
• Alarm Panels
• Valve Activation, Gate or Lighting Control

DESCRIPTION
The XTSD-WRC-EM transmitters and receivers are designed for use in various wireless remote-control applications. When triggered with an external dry-contact switch, the switch transmitter will send a digital encoded, FSK modulated signal to its companion control receiver. The receiver will verify the digital code and then activate its open-collector output to drive relays, lights or alarms.

Each system is sold as a factory programmed matched set. That means there is no field settings needed to operate right out of the box.

Power for the transmitter or receiver can come from any 12-24V DC power supply or battery. An internal fuse protects each unit from a reverse power connection.

This model is designed to be mounted directly to standard enclosures with a ¾” drilled hole or knockout.

NOTE: UNITS ARE FACTORY PROGRAMMED AS A SINGLE MATCHED SET. IF YOU WANT TO USE ONE TRANSMITTER TO CONTROL MORE THAN ONE RECEIVER, OR MORE THAN ONE TRANSMITTER TO CONTROL A SINGLE RECEIVER, PLEASE CONTACT US PRIOR TO PURCHASING SO WE CAN CUSTOMIZE A GROUP OF UNITS FOR YOU SPECIFIC TO YOUR APPLICATION. THERE IS NO EXTRA CHARGE FOR THIS SERVICE.

2.4 GHz General Specifications
Radio Frequency: 2.480 GHz
Regulatory: FCC Part 15 (No license required)
Control Lines: 1 or 2
Antenna Connection: RP-SMA
Antennas: 5dbi, Omni-directional (Included)
Transmit/Receive Distance:
with included antennas: Line-of-site (LOS) up to 100ft.
with optional antennas: Line-of-site (LOS) up to 300ft.
Transmitter/Receiver Code Matching: Factory set
Wire Connection: 4’ Cable with stripped leads
Operating Temperature: -22 to 140 ºF (-30 to 60 ºC)
Enclosures: PVC, Conduit Body, 1/2" Mount (Condelette)

Switch Transmitter Specifications
RF Power Output: 0 dBm  (1mW)
RF Output Impedance: 50 Ohm nominal
RF Data Rate: 250 kbps
Operating Power 12-24V DC @ 3W max
Control Input Type: Dry-contact Switch

Receiver Specifications
Receive Sensitivity: -94 dBm
Operating Power: 12-24V DC @ 3W max
Control Output: Open collector, 24V DC, 100mA Max

Available Models

XTSD-WRC-EM24-1 Industrial Wireless 1-Line 2.4 GHz Remote Control Transmitter/Receiver

Available Options

XTSD-24-MDANT-9 Optional 2.4 GHz Medium Distance Antenna (up to 400ft line-of-site)